
我們專注於鞋底用聚氨酯
中硬度中高密度聚氨酯耐寒鞋鞋底原液
牌號(Shop sign): ZG-P-8130/ZG-I-8260
耐寒鞋鞋底原液
PU Resin for shoe sole of cold-resistant shoes
1. 特性:中硬度,中高密度。耐寒,半耐寒。
Characteristic: Medium hardness, medium and low density, cold resistance and semi cold resistance
2. 用途:適用於耐寒,半耐寒男女鞋底的生產。
Application: Applicable to the production of cold-resistant and half hardy soles for both men and women shoes
3. 原液特性Typical properties of PU Resin
3. 原液特性Typical properties of PU Resin
品 名 Name of products |
外 觀 Appearance |
粘 度Viscosity(Pa·s/50℃) | 密 度Density(g/cm3/40℃) | 包 裝Package(kg) |
ZG-P-8130 | 白色或淡黃,液狀無異物White or pale yellow, liquid, no foreign material | 1.00-1.40 | 1.16-1.20 | 18 |
ZG-I-8260 | 透明液體無異物Transparent liquid, no foreign materials | 0.20-0.40 | 1.18-1.20 | 20 |
參考發貨配比(Reference shipments ratio):A/B=30/24(桶)
Reference shipments ratio: A/B=30/24(barrel)
4. 成型條件及物性值(Molding conditions & physical properties):
測試項目Test item | 參考物性值Reference physical properties |
鞋底成型密度Molded density of sole(g/cm3) | 0.25~0.65 |
硬度(A型)Hardness (type A) | 35~65 |
拉伸強度Tensile strength(MPa) | 3.5~4.5 |
伸長率Elongation(%) | 250~550 |
NBS耐磨NBS abrasion resistance (%) | ≥10% |
自由泡密度Free foam density(g/cm3) | 0.15~0.35 |
耐折性(常溫)(4萬次裂口長度,mm)Folding endurance (room temperature)(40,000 gap length mm) | <8 |
●配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。
Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.
●自由泡沫密度會依季節(溫度,濕度)的不同而變化。
Free foam density will vary with the seasons (temperature, humidity).
●脫模時間會隨成型品厚度的增加而延長。
Stripping time will be extended with the increase of the thickness of moldings.
●耐折條件:屈撓角度為 90度,頻率為80次/min*4萬次。
Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times
● 以上數據僅作參考,具體數據以實際操作為準。如需其他物性指標,請與我公司聯係。
Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.