恒泰源聚氨酯

我們專注於鞋底用聚氨酯

ZG-P-8850/ZG-I-7620

產品編號
數量
-
+
庫存:
Product description
參數

牌號(Shop sign): ZG-P-6955/ZG-I-8308N

低硬度、中密度男女休閑鞋底原液

Low-hardness and medium-density shoe sole PU Resin for casual shoes for both men and women

1. 特性:低硬度,中密度。

Characteristic: Low hardness, medium density.

2. 用途:適用於男女休閑鞋鞋底的生產。

Application: Applicable to the production of casual shoes for both men and women.

Low-hardness and medium-density shoe sole PU resin for casual shoes for both men and women ZG-P-6955/ZG-I-8308N

3. 原液特性Typical properties of PU Resin

品   名

Name of products

外   觀

Appearance

粘   度Viscosity(Pa·s/50℃) 密   度Density(g/cm3/40℃) 包  裝Package(kg)
ZG-P-6955 白色或淡黃,液狀無異物White or pale yellow, liquid, no foreign material 1.00-1.60 1.16-1.20 18
ZG-I-8308N 透明液體無異物Transparent liquid, no foreign material 0.10-0.30 1.18-1.20 20

參考發貨配比(Reference shipments ratio):A/B=31/23(桶)

Reference shipments ratio: A/B=31/23(barrel)

 

4. 成型條件及物性值(Molding conditions & physical properties):

測試項目Test item 參考物性值Reference physical properties
鞋底成型密度Molded density of sole (g/cm3 0.35~0.45
硬度(A型)Hardness (type A) 35~50
拉伸強度Tensile strength(MPa) 3.5~4.0
伸長率Elongation(%) 300~400
NBS耐磨NBS abrasion resistance(%) ≥10%
自由泡密度Free foam density(g/cm3 0.25~0.30
耐折性(常溫)(4萬次裂口長度,mm)Folding endurance (room temperature)(40,000 gap length mm) <8

●配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。

Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.

●自由泡沫密度會依季節(溫度,濕度)的不同而變化。

Free foam density will vary with the seasons (temperature, humidity).

●脫模時間會隨成型品厚度的增加而延長。

Stripping time will be extended with the increase of the thickness of moldings.

●耐折條件:屈撓角度為 90度,頻率為80次/min*4萬次。

Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times

● 以上數據僅作參考,具體數據以實際操作為準。如需其他物性指標,請與我公司聯係。

Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.

未找到相應參數組,請於後台屬性模板中添加

地址:

浙江省溫嶺市工業園區一號路科技園

       

EN    PT
ES    RU

Copyright © beplay2 版權所有  浙ICP備20019453號 

中文 |EN | PT | ES | RU

搜索
搜索